Moteck V-BOX II


ONE FOR TWO APPLICATIONS
DiSEqC POSITIONER AND STAND ALONE POSITIONER


FEATURE:
Compatible with DiSEqC 1.0 /1.2 Receiver or Any Receiver
Compatible with any Actuator or H-H Mount
3 Digit LED Display
Drive Dish up to 3M ( Optional:5M )
99 Satellite Positions
Fine-tune EAST / WEST Buttons
Optional Remote Control Available
Overload Protection ( Auto-recovery )
Anti-Noise Design


Specification:

Model

V-BOX II

Input

230 VAC / 50Hz(110 VAC / 60Hz available)

Output

36 VDC

Max. Dish Diameter

3M / 5M

Max. Output Current

3.5A / 4.2A

Max. Power Consumption

80W / 100W

Protocol

DiSEqC 1.0 / 1.2

Positions Memories

99

Controled by

DiSEqC 1.2 Receiver or Optional Remote Control

Display

3 Digit LED

Resynchronize Function

YES

Manual Buttons

Power ON / OFF, EAST / WEST

Protection

Firmware Limit Protection
Electric Overload Protection

This device is used to position your C band dish. It can work as a stand alone positioner or it can accept commands from a satellite receiver.

If you have a receiver with Diseqc you can make the satellite receiver control the positioner. The Vbox becomes the slave unit. It goes to whatever position the receiver tells it to. The idea is that once programed you can change channels and the dish will go to the correct satellite automatically. There is no need to juggle 2 remotes. Also no confusion with what channel is on which satellite. Connection from receiver to positioner is made through the coax cable on the back of the receiver.

If your receiver is old and does not have Diseqc, you can still use the vbox as a manual positioner.



FEATURE:
Compatible with DiSEqC 1.0 /1.2 Receiver or Any Receiver
Compatible with any Actuator or H-H Mount
3 Digit LED Display
Drive Dish up to 3M ( Optional:5M )
99 Satellite Positions
Fine-tune EAST / WEST Buttons
Optional Remote Control Available
Overload Protection ( Auto-recovery )
Anti-Noise Design
Input 230 VAC / 50Hz
Output 36 VDC
Max. Dish Diameter 3M / 5M
Max. Output Current 3.5A / 4.2A
Max. Power Consumption 80W / 100W
Protocol DiSEqC 1.0 / 1.2
Positions Memories 60
Controled by DiSEqC 1.2 Receiver or Optional Remote Control
Display 3 Digit LED

Resynchronize Function YES
Manual Buttons Power ON / OFF, EAST / WEST

Protection Firmware Limit Protection
Electric Overload Protection